Well, still waiting to go into paint. Meanwhile I have done a few things to the truck. I also downloaded Windows10 to this computer and I got locked out of my blog. Finally got that solved.
While waiting for paint, I installed the parking brake. It still needs a final adjustment but will do that at a later point. I also got back to the gauge panel and completed the wiring. It is now ready to drop in and plug into the main panel when that is installed.
I also drilled some holes in the rear bed pockets for the rear tail light wiring. After paint, grommets will fill the holes to protect the wiring harness.
I put a hold down apparatus in the box behind the seat to hold down the battery when it goes in. I used nutserts in the floor and threaded some 1/4 inch stainless steel rod I got off an old hotdog cooking fork. (A little MacGyver there) and drilled holes in the cab floor for the wiring. Used some 1/2 inch water hose for grommets through the floor. Going to work great. Will finish running the wires after paint.
Tuesday, October 6, 2015
Subscribe to:
Posts (Atom)
